To Use Cuisinart Slicer Attachment, attach the slicer to the stand mixer, ensure the mixer is off, remove the port cover, and securely lock the attachment. For slicing and shredding, use the angled feed tube and pusher, while the straight feed tube and pusher are used for spiralizing. Always apply even pressure when processing the ingredients, and be cautious of the sharp blades. After use, clean the attachment by disassembling the parts and rinsing them under running water or placing them in the dishwasher. Remember to unplug the power cord before cleaning and avoid immersing any part of the attachment or mixer in water.
Operating Instructions: How To Use Cuisinart Slicer Attachment
Attach the Slicer to Your Cuisinart Stand Mixer
Before you can start slicing and shredding, you need to attach the slicer to your Cuisinart Stand Mixer.
Make sure the stand mixer is OFF. Ensure that the power is switched off before you begin the attachment process.
Gently pull the port cover off the front of the mixer head to remove it. The port cover is located at the front of the mixer head and needs to be removed to access the attachment area.
Turn the stand mixer attachment knob counterclockwise until the outlet opening is unobstructed. Rotate the attachment knob in a counterclockwise direction to clear the way for the attachment to be inserted.
Insert the square metal end of the unit base into the opening. Take the square metal end of the unit base and carefully insert it into the now unobstructed opening of the stand mixer.
Turn it back and forth slightly until the knob slips into the notch, and the attachment locks into place. Gently rotate the unit base back and forth until the knob fits securely into the designated notch, ensuring that the attachment is properly locked in place.
Turn the stand mixer attachment knob clockwise to secure the attachment to the mixer. Rotate the attachment knob in a clockwise direction to fasten and secure the attachment firmly to the stand mixer.
Place the Cutting Cone Holder on the base. Take the Cutting Cone Holder and position it on top of the base, ensuring it fits securely and aligns with the attachment.
Position a bowl under the nozzle to catch the processed food. To collect the sliced or shredded food, place a bowl or suitable container under the nozzle of the attachment. This will prevent any mess and conveniently gather the processed ingredients.
Slicing and Shredding
Using the Cuisinart Slicer Attachment, you can achieve precise slicing and shredding results.
Slicing and Shredding (Using the Angled Feed Tube and Pusher)
To slice and shred ingredients effectively, follow these step-by-step instructions:
Properly insert the desired Cutting Cone into the Cutting Cone Holder. Choose the cutting cone that suits your slicing or shredding needs and securely place it into the Cutting Cone Holder. Ensure it is properly seated and ready for use.
Place the Angled Feed Tube on the unit and turn it counterclockwise until it clicks and locks into place. Take the Angled Feed Tube and align it with the attachment unit. Rotate it in a counterclockwise direction until it clicks and securely locks into place. Make sure the feed tube is facing you for convenient access.
Trim the edges of the fruit or vegetable to form a flat surface matching the width of the feed tube. Prepare your ingredient by trimming the edges to create a flat surface matching the feed tube’s width. This step ensures stability and optimal processing.
Place the food item directly into the feed tube. Once your ingredient is properly trimmed, insert it directly into the feed tube, positioning it securely for processing. Take care not to overload the feed tube beyond its capacity.
Turn the stand mixer to speed setting 12. Activate the stand mixer and set it to speed setting 12. This high speed ensures efficient slicing or shredding of the ingredient.
Apply even force while pushing down to process the food. With an even and gentle downward force, press the ingredient through the feed tube. The sharp blades of the cutting cone will slice or shred the ingredient effectively.
The sliced or shredded items will drop into the bowl. As you process the ingredient, the sliced or shredded pieces will drop directly into the bowl positioned under the attachment. This allows for easy collection and further use in your recipes.
Once processing is complete, turn the speed setting to 0. When you have finished slicing or shredding the ingredient, turn the speed setting of the stand mixer to 0 to stop the attachment from operating.
Cleaning, Storage, and Maintenance
To ensure the longevity and optimal performance of your Cuisinart Slicer Attachment, it’s important to follow these detailed cleaning, storage, and maintenance guidelines:
Unplug the power cord before cleaning. Before any cleaning process, ensure that the power cord is unplugged from the electrical outlet. This step ensures safety during maintenance.
After each use, disassemble all the accessories attached. To facilitate thorough cleaning, disassemble all the attached accessories, including the feed tubes, cutting cones, and cutting cone holder. This allows for easy access to all parts.
Rinse the accessories under running water and use the cleaning brush to remove any food scraps. Rinse each accessory under cool running water to remove any remaining food debris. Utilize the cleaning brush to gently scrub away any stubborn residues.
All removable parts are top-rack dishwasher-safe for your convenience. For added convenience, all removable parts of the Cuisinart Slicer Attachment are top-rack dishwasher safe. You can place them in the dishwasher for a thorough and effortless cleaning process.
Wipe the outside surface of the motor unit with a damp cloth, then dry thoroughly. To clean the outside surface of the motor unit, dampen a cloth with water and wipe it gently. Ensure that the surface is thoroughly dry before storing or using the attachment again.
Tips and Hints
To enhance your experience with the Cuisinart Slicer Attachment and achieve the best results, consider the following valuable tips and hints:
Choose firm vegetables and fruits for the best results. Opt for vegetables and fruits that are firm and not overly ripe. Firm produce will yield better slicing, shredding, and spiralizing results, ensuring cleaner cuts and well-formed spirals.
No need to cut ingredients to fit the height of the feed tube, but some may require trimming to match the width. Unlike the height of the feed tube, which accommodates ingredients of various sizes, you may need to trim certain ingredients to match the width of the feed tube. This ensures a secure fit and even processing.
Use even pressure when processing food items for consistent results. Applying even pressure while pushing down on the ingredients ensures consistent and uniform slicing, shredding, or spiralizing. This technique allows for precise cuts and desirable textures.
Frequently Asked Questions
Can I use the Cuisinart Slicer Attachment with other Cuisinart stand mixers?
Yes, the Cuisinart Slicer Attachment is compatible with the SM-50 Series, SMD-50 Series, and SM-35 Series stand mixers.
Are the parts dishwasher safe?
Yes, all removable parts of the Cuisinart Slicer Attachment are top-rack dishwasher-safe for easy cleaning.
Can I use the Cuisinart Slicer Attachment to slice cheese?
Yes, the attachment can be used to slice firm and hard cheeses. Ensure the cheese is well chilled for best results.
The Cuisinart Slicer Attachment is a versatile and user-friendly tool that allows you to easily slice, shred, and spiralize ingredients. With its four cutting cones, sturdy base, and feed tubes, this attachment offers a range of cutting options and flexibility in the kitchen. By following the step-by-step instructions for attachment, slicing, shredding, and spiralizing, you can create beautifully cut ingredients for a variety of dishes. Proper cleaning, storage, and maintenance ensure the longevity and optimal performance of the attachment.
Key Notes and Important Points:
- The Cuisinart Slicer Attachment is compatible with the SM-50 Series, SMD-50 Series, and SM-35 Series stand mixers.
- The attachment offers four cutting cones for various cuts: slice/ribbon, crinkle slice/ribbon, thin shred/spaghetti, and wide shred/spaghetti.
- Use the angled feed tube and pusher for slicing and shredding, and the straight feed tube and pusher for spiralizing.
- Ensure even pressure while processing for consistent results.
- Clean all removable parts after each use, and avoid immersing the stand mixer or power cord in water.
- The attachment is dishwasher safe, and the outside surface of the motor unit can be wiped with a damp cloth.
- Experiment with different firm fruits and vegetables for creative dishes.
- Always prioritize safety and handle the sharp blades with care.
References And Citations:
Suggested External Links:
- Cuisinart Slicer Attachment Manual – Access the official manual for the Cuisinart Slicer Attachment, providing detailed instructions and additional information.
- Cuisinart YouTube Channel – Watch instructional videos and demonstrations on using the Cuisinart Slicer Attachment and other Cuisinart products on their official YouTube channel.
John Hebdon is a food enthusiast, passionate chef, and author of various articles and blog posts related to food and cooking. With a deep love for all things culinary, John’s blog serves as a platform to share his extensive kitchen experiences with a broader audience.
In addition to his culinary expertise, John has a flair for writing and a natural ability to share his passion for food with others. His articles and blog posts are informative, engaging, and packed with practical tips for readers of all skill levels.
As a food enthusiast and writer, John is always on the lookout for new and exciting culinary experiences. Whether it’s trying out a new restaurant, experimenting with a new recipe, or simply sharing a favorite dish with friends and family, John is always eager to explore and share the world of food with others.